Harvester Spacing Change/Swap

How to Swap Your Chestnut Harvester Spacing

Below are the details on how to change the spacing on your Chestnut Harvester. If you have any questions please feel free to contact us! info@baganut or 904-641-3934

Move Videos & Instructions Are Coming Soon!!!

Required Parts For Spacing Your Machine To Collect Chestnut Burrs:

  • 12 qty – Wheels (F0033)
  • 22 qty – Ejector Fingers (F0029)
  • ~2 qty –  Large 3/4″ Snap-on Spacers (F0027)

Chestnut Harvester Spacing

    * On the wheel axle,  use 4qty of the thicker & 1qty of the thin washers on the outside

Chestnut Washer Spacing

Required Parts For Spacing Your Machine To Collect the Chestnut (Nut Only):

  • 23 qty – Wheels (F0033)
  • 22 qty – Ejector Fingers (F0029)
  • ~2 qty –  Large 3/4″ Snap-on Spacers (F0027)
  • 1 qty – 1/8″ Snap-on Spacer (F0026)
  • 6 qty – 1/8″ Washer (F0013) (you will need 3qty on each side of the wheel axle between the side bracket and the wheels)
  • 2 qty – 1/16″ Washer (F0014) (you will need 1qty on each side of the wheel axle between the side bracket and the wheels)

Chestnut_Nut_Wheel_SetUp

Click HERE for expansion written instructions