Home / Changing The Spacing In Your Chestnut Harvester To Pick Up The Burrs

Changing The Spacing In Your Chestnut Harvester To Pick Up The Burrs

Move Videos & Instructions Are Coming Soon!!!

Required Parts For Spacing Your Machine To Collect Chestnut Burrs:

  • 12 qty - Wheels (F0033)
  • 22 qty - Ejector Fingers (F0029)
  • ~2 qty -  Large 3/4" Snap-on Spacers (F0027)

Chestnut Swap1

    * On the wheel axle,  use 4qty of the thicker & 1qty of the thin washers on the outside 

Chestnut Swap1

 

Required Parts For Spacing Your Machine To Collect the Chestnut (Nut Only):

  • 23 qty - Wheels (F0033)
  • 22 qty - Ejector Fingers (F0029)
  • ~2 qty -  Large 3/4" Snap-on Spacers (F0027)
  • 1 qty - 1/8" Snap-on Spacer (F0026)
  • 6 qty - 1/8" Washer (F0013) (you will need 3qty on each side of the wheel axle between the side bracket and the wheels)
  • 2 qty - 1/16" Washer (F0014) (you will need 1qty on each side of the wheel axle between the side bracket and the wheels)

 

 

Click HERE for expansion written instructions