Harvester Spacing Change/Swap

How to Swap Your Black Walnut or Pine Cone Harvester

Below are the details on how to swap your Black Walnut or Pine Cone Harvester. If you have any questions please feel free to contact us! info@baganut or 904-641-3934

 

Required Parts For Spacing Your Machine To Collect Small Objects (1.5″ to 2″):

  • 11 qty – Wheels (F0034)
  • 20 qty – Ejector Fingers (F0029)
  • 2 qty – LARGE Ejector Finger (F0046)
  • 4 qty –  Small 1/8″ Snap-on Spacers (F0028)

Small_Black_Walnut_Spacing

Required Parts For Spacing Your Machine to Collect Medium Objects (2 1/4″ to 3″):

  • 8 qty – Wheels (F0034)
  • 7 qty – Spacer Wheel – Black (F0043)
  • 14 qty – Ejector Fingers (F0029)
  • 1 qty – LARGE Left Ejector Finger (F0229 “Left”)
  • 1 qty – LARGE Right Ejector Finger (F0229 “Right”)
  • ~6 qty –  Small 1/8″ Snap-on Spacers (F0028)
  • ~8 qty –  Large 3/4″ Snap-on Spacers (F0027)

Required Parts For Spacing Your Machine To Collect Large Objects (3 1/4″ to 4″):

  • 6 qty – Wheels (F0034)
  • 10 qty – Spacer Wheel – Black (F0043)
  • 15 qty – Ejector Fingers (F0029)
  • 2 qty – LARGE Ejector Finger (F0046)
  • ~2 qty –  Small 1/8″ Snap-on Spacers (F0028)
  • ~6 qty –  Large 3/4″ Snap-on Spacers (F0027)

Click HERE for expansion written instructions.